Activating the PRESET EDIT button (illuminates when activated) allows a user to edit an existing
preset(s) without transmitting control data. This means that a preset can be selected and modified using
the Local Block without actually transmitting the changes to the selected unit. This makes it possible to
change settings for an upcoming preset, for example the next preset used in a live show, without inter-
fering with the current settings of the connected Model 1788s. Presets can also be modified without
having the modified 1788’s connected or without running the COMM TEST.
The Preset Edit Mode can be used as follow:
1. At any time, it is possible to enter the Preset Edit Mode by pressing the PRESET EDIT button.
When entering the preset edit mode, the 1788-R automatically loads the preset in the CURRENT
readout. If no presets have been loaded, preset #1 is chosen as the default preset. To edit a new
preset continue with steps 2 and 3.
2. Use the SELECT knob to select a preset number, which appears in the NEXT display. The VALID
LED’s will flash red to indicate which unit’s are present in the selected (next) preset.
3. Press the LOAD button to load the selected presets data into the 1788-R’s memory without
transmitting this data to the connected Model 1788’s. The VALID LED’s will now flash green to
indicate that the selected (next) preset is ready to be loaded into the 1788-R.
4. Select the unit you want to modify with the UNIT SELECT buttons. Make all desired function
changes in the Local Block. Repeat this step for all the units you want to modify.
5. To save the new settings select the ‘Next’ preset number (using SELECT knob) in which the
changes will be saved and press the SNAP SHOT button. (If the selected preset is protected first
unprotect it by pressing the UNPROTECT button or the new setting will not be saved.)
6. Exit the Preset Edit Mode by pressing the PRESET EDIT button again (LED will no longer be illu-
minated) The 1788-R will now upload all settings from the connected Model 1788’s. Uploading for
each connected unit is indicated by the illumination of that units respective red comm test LED on
the 1788-R.
Note: If the Preset Edit Mode is exited without first saving the changes by pressing the
SNAP SHOT button, all changes will be lost.
In the Preset Edit Mode it is also possible to add/remove units from a preset.
To add a unit, press the UNIT SELECT button that is next to the last connected unit that shows a
flashing green VALID LED. The new unit selected will now be added to the preset containing the
same function settings as the unit with the unit number just before itself. For instance, if unit #4 is
added to a preset it will, by default, contain the same functions as unit #3. To indicate that this
unit now is a part of the preset, the corresponding VALID LED will start flashing green.
Use the ERASE button to remove a unit from a preset. Only the last unit in a preset can be
removed (one at a time). Select the unit with the UNIT SELECT button and press the ERASE
button. To indicate that a unit has been removed from a preset, the corresponding VALID LED will
no longer be flashing.
To save the changes after adding or removing a unit(s) from a preset make a SNAP SHOT of the settings
to the desired preset number.
10
(12 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern