Aphex 5200 Bedienungsanleitung PDF herunterladen (Seite 14)

1. DISPLAY MODE- Select one of the following as the type of head amp displayed in the screen.

• INTERNAL HA (PM5D-RH/DSP5D) The internal head amp channels (AD IN 1–48, AD STIN 1–

4) will be displayed.

• EXTERNAL HA 1-4

• EXTERNAL HA 5-8

The channels of an external head amp device (ID number= 1–4, or ID number= 5–8) connected

via the [HA REMOTE] connector will be displayed.

2. Model name- For each ID number, this indicates the model name of the external head amp

device that is connected. If no device is connected this will indicate “-----”. The Aphex 1788A and

188 will show up as AD8HR.

3. Slot/Channel- Here you can view/select the slot and channels to which the audio output of the

external head amp device is connected.

Note

If an external head amp device is connected to a PM5D slot, you must specify the appropriate

slot/channels manually. Please note that if you specify an incorrect setting, the input channel HA

indication in screens such as the IN HA screen may differ from the actual state.

4. +48V MASTER- If a preamp is connected via the [HA REMOTE] connector, this indicates the

master phantom power on/off status. (Otherwise, this indicates “---”.)

5. +48V- Switches phantom power (+48V) on/off for each channel.

6. HPF (High Pass Filter)- Turns the HPF on/off for each channel.

7. Cutoff frequency- This feature is not available for the Aphex 1788A and 188.

Aphex hopes that you find this documents helpful, but again, we highly recommend that you read

the 1788A manual, 1788A RC manual and your Yamaha digital mixer manual for more details

and a solid understanding of each product.

You should always make sure your mixers and preamps have the most current firmware installed.

1 2 ... 9 10 11 12 13 14 15

Keine Kommentare

Aphex 5200 Bedienungsanleitung Seite 14