Aphex 5200 Bedienungsanleitung PDF herunterladen (Seite 4)

1. REMOTE FUNCTION. This parameter selects a device to be connected to the DM1000

REMOTE connector.

2. HA section. This section enables you to specify the slot channels that will receive eight channel

signals from the preamps that have their ID numbers set to 1 through 4.

3. HA CONTROL section. This section enables you to set the preamp channel 1–8 gain and the

Phantom power on or off.

• ID #1–#4........................These buttons select the preamps you want to control.

• 1–8 (1st row).................These parameter controls adjust the gain for preamp channels 1–8.

• +48V .............................When you turn on these buttons, the phantom power on the

corresponding channels will be turned on.

• 1–8 (2nd row)............... These parameter controls adjust the cut-off frequency of the high-

pass filter for the corresponding channels. They are grayed out and cannot be set for these

preamps.

• HPF ................................ When you turn on these buttons, the high-pass filter on the

corresponding channels will be turned on. They are grayed out and cannot be set for these

preamps.

Make sure that the REMOTE FUNCTION parameter is set to “HA,” and in the HA section select

the slot channels that receive signals from the preamps.

Use the parameter controls and buttons in the HA CONTROL section to set the channel gain and

turn on/off the phantom power for the preamps.

1 2 3 4 5 6 7 8 9 ... 14 15

Keine Kommentare

Aphex 5200 Bedienungsanleitung Seite 4